Cat6 Solid-Bare Copper Gel-Filled Core 1000ft Cables Wooden Spool

Networking cables are the best medium to pass data packets properly from one device to another device. But sometimes there are cases when there is a need to install a connection outdoors to connect multiple buildings to provide an active internet connection.

Which cable to adopt — Not other than “Gel-Filled Cat6 Solid Bare Copper Cable”. The cat6 gel-filled is also called cat6 outdoor direct burial cable  due to the presence of gel in its core to prevent the cable from water damage. Just like normal cat6 cable the gel-filled cat6 solid bare copper cable resembles the same properties. Just lean towards some of the important aspects of cat6 solid bare copper cable. 

What Is Cat6 Gel Filled Cable?

The type of ethernet cable engineered to be used in underground and outdoor installation. It can bear harsh climate conditions and is also UV resistant to withstand extreme temperatures. The internal structure of the cable observes strict properties. The entire core of the cable is filled with a gel-like substance covering every side of the conductor (Twisted Pairs). 

Inside the cable, there is a spline, PE tape beneath the cable jacket, and a rip cord to peel the jacket off the cable more easily. The PE ( Polyethylene Tape) protects the cable from water and moisture in order to protect the inner conductor of the cable. Spline in the cable places conductors (4 Twisted Pairs) apart in order to reduce pair-to-pair crosstalk. 

The twisted pair of the cat6 solid copper cable is tightly twisted so that signals remain intact and a few amounts of the signals degrade.

Cat6 Solid Bare Copper Conductor

A bare copper conductor is also a pure form of copper; the difference between bare copper and solid copper is hard to find except for sheathing. The bare copper conductor also reflects the finest conducting properties while sending signals from one place to another. 

Moreover, the cat6 bare copper conductor is ductile, and non-corrosion which means it lasts for longer while transmitting signals. Also, there is less electrical resistance noted in copper cables. The cat6 solid bare copper cable is the right form of cable to invest in. The cable exhibits the core benefit of providing future-proofing to your cabling network. 

• Bare copper conductors
• Cat6 Performance
• UV-resistance
• Signal integrity
• Water and weatherproof
• LLDPE Jacket
• Easy termination

Transmission Speed Of Cat6 Bare Copper

The Cat 6 bare copper cable is well known for its speed and bandwidth. The cable is mostly used for both shorter and longer runs. For longer runs, the maximum installation distance is 100 meters (328 ft). At this length, the cat6 cable’s maximum speed is 1 Gbps over longer runs. Similarly, if you reduce the length of the cable to 50 meters (164 ft), the maximum speed you will get is 10 Gbps. Moreover, the cable uses a 23 AWG conductor size and is tested to deliver a bandwidth of 550 MHz. Such speed specifications will support fast ethernet applications that include.

• 100/1000/BASE-T
• 10GBASE-T
• 100 VG ANYLAN
• PoE/+/++ applications
• Audio/Video streaming
• VoIP
• ATM 155
• IoT (Internet of Things)

Using Cat6 bare copper cable will ultimately benefit your networking speed specifications. So order now to get this Premium Cat6 bare copper in a wooden spool.

Where To Install Gel-Filled Cat6 Solid Copper Cable

Cat6 gel-filled cable’s jacket is denoted as “direct burial” or cmx grade cable and as the name implies the cable is used for installing directly in the ground. So, where to install this cable is the next question. 

For convenience, you can install this cable 18-24 inches below the ground without any conduit (Extra Protective Layer). The cable outer sheath provides extra protection against bio-organisms. Also, make sure that if there is a threat of rodents you might secure your cable by wrapping it into another sheath to avoid bites of the rodents.

You can install this cable in multiple places as per your choice some of them are as follows

• Residential backyards
• Industrial facilities
• Golf courses
• Parks and recreation areas
• Farms and agriculture
• Construction sites
• Outdoor security systems
• Remote locations
• Commercial outdoor networks
• For connecting multiple buildings
• Campuses and educational facilities

These are the mostly demanding places where there is wider use of Cat6 Direct Burial cable. Also, keep in mind while installing cable in the ground do not forget about grounding — to overcome extra voltage in order to avoid damage to the cable.

Packaging – Cat6 CMX Cable Wooden Spool

Superior quality Cat6 solid cable is manufactured in China is packed in a wooden spool for easy unrolling and installation. The cat6 direct burial solid bare copper cable is bulky so taking care of the cable the packing design is on a wooden spool to avoid any kinks or damage to the cable. 

The cable is 1000 ft in length in order to handle bulk installations where there is confusion in the required length. Furthermore, for easy identification of the cable length, the whole length of the cable is marked with “Ft” and you can use this cable in the future for your next project. 

Why Smartech Cable?

We deal in industry standard ethernet cables but also direct burial Cat6 cable for outdoor installation purposes. All our cables are verified by ANSI/TIA 568-C.2 and are RoHS compliant. The gel-filled cat6 solid copper cable is verified by the DTX-1800 Versiv Cable Analyser test to secure the safety of the cable. 

Furthermore, you can avail of 100% original quality cable for your installation at a market-competitive price. We have a huge variety of Cat6 keystone jacks, and Cat6 patch panels for easy shopping. For more information, you can call our customer support for expert solutions.

Good Luck with your shopping.